• Compact size: Fits standard 2' x 4"ceiling panels.
• Low clearances to combustibles.
• Pre-assembled: Just hang and connect.
• Corrosion resistant: All aluminized steel.
• Mirror Brite highly polished reflector: For maximum reflectivity
• Vented and unvented operation.
• Indoor or outdoor combustion air: (outdoor kit is optional).
• Multi-poise mounting: Horizontal to 45 degrees.
• Adjustable BTUH inputs for design flexibility after installation.
• Direct spark ignition: With 100% safety-shutoff.
• Full one year limited warranty.

COMBUSTION CHAMBER/HEAT EXCHANGER

• 2.75" O.D. special serpentine shaped tubing - 15 linear foot equivalent.
• 14 gauge Aluma-Therm steel - (Aluminized Titanium Steel). - 1.864 pounds per linear foot.
• 0.72 square feet of radiant surface per linear foot.
• Wave formed turbulator for increased efficiency.

• 50' length of 1/0 double loop chain and 8 "S" hooks for hanging.
• Stainless steel flexible gas connector: 24" long, 1/2" NPT, 3/8" NPT with gas cock.
• Decorative aluminum grill: 2' x 4', 1/2" thick with 1/2" x 1/2" grid cells
• Thermostat: (S22 P.O.) 40-80° F, 4-27° C, with positive off
• Thermostat: (IC30-302) 50-90° F, 10-32° C, bi-metal, 2.5 amps at 24V
• Outdoor combustion air kit:
  Consists of: Inlet air cap, Type B for 3" duct with 3" adapter: 4 1/2" stub male to male, 3" O.D., 26 gauge: 10' of 3" O.D. 26 gauge inlet air ducts (4 pcs at 2 1/2' long): heater reducer (4" x 3" female). 2-3" 90" adjustable sheet metal elbows. All parts galvanized.