GAS FIRED DOOR JET INFO |
 Mighty
DOORJET heaters blast in-rushing cold air to maintain
employee comfort. Productivity improves. Energy dollars
are saved.
DOORJET heaters stop
the chills and wasted energy that occur when outside
bay doors are opened in industrial plants and warehouses.
The in-rushing cold air is tempered by the DOOR JETs
heat surge, keeping employees working in the area
comfortable.
Energy is saved as the building's heating system maintains
its normal operation without the added strain of attempting
to compensate for the influx of large amounts of cold
air.
Fully automatic operation -
You don't have to remember to turn the DOORJET on!
Solaronics DOORJETs start operating as the door is
raised. A switch is tripped starting the fan and burner
Automatically, a "jet" of heated air is
directed toward the door without a warm-up period.
When the door is closed, the fan and burner shut off
immediately.
Easy
installation for all door types
Solaronics DOORJETs are installed with the angle of
air discharge from vertical to horizontal. Vertical
mounting to direct the heat straight down is standard
for roll up or straight lift doors. For conventional
doors, horizontal or angled placement may be utilized.
After mounting, connections to electrical source,
gas supply, door limit switch and remote control complete
the installation.
Under normal conditions, a single DOORJET will handle
door openings up to about 12' x 12'. Larger openings
require two or more heaters.
Energy saving DOORJET lowers
heating costs.
Solaronics DOORJET heaters are designed to operate
economically on natural gas, and reduce the cost of
heating buildings. The heaters can also be specified
to operate on other gaseous fuels. DOORJET heaters
are available with BTUH input ratings from 550,000
to 950,000.
DOORJETs are supplied completely assembled and factory
tested prior to shipment. A stainless steel burner
and fully sealed electrical controls ensure safe,
dependable, long life operation.
See below for technical specifications.
|
|
DOORJET
HEATER APPLICATIONS
-
Warehouses
-
Car
Washes
-
Factories
-
Distribution
Centers
-
Maintenance
Facilities
-
Auto
Body Shops
-
Marine
Repair Facilities
|
DOORJET
Controls
-
Remote
control with On-Off switch and control circuit
fuse
-
1
1/2 or 2 HP TEFC ball bearing 3 phase motor
-
Magnetic
motor starter
-
Air
flow safety switch
-
Control
transformer
-
Door
limit switch
-
High
temperature limit safety switch
-
Remote
summer-winter switch
-
Electronic
ultraviolet sensor
-
Gas
pressure regulator
-
Solenoid
gas valve
-
Spark
ignition
-
Optional
FM. or l.R.l. controls
|
|
DOORJET
Features
- Heavy
Duty Axial Flow Fan
- 1%
HP TEFC Type Ball Bearing 3 Phase Motor
- Magnetic
Motor Starter
- Air
Flow Switch
- Stainless
Steel baffle Burner
- Door
Limit Switch
- High
Temperature Limit Switch
- Seal-Tite
Flexible Conduit and Fittings
- NEMA
4 Remote Control with On-Off Switch Control Circuit
Fuse and Summer-Winter Switch O
- Optional
FM or I.R.I. Controls
- 16
gauge #304 stainless steel casing with two reinforcing
angle rings
- Prewired
sealed stainless steel control box
- Electronic
Ultra Violet Sensor
- Galvanized
Pipe Fittings
- Hanging
Holes
- Optional
Connection for Outside Air
- Special
"Jet" Type Burner
- Gas
Pressure Regulator
- Solenoid
Gas Valve
- Special
Modified Spark Ignition Arrangement
- Vertical
or Angle Mounting "Versatile"
|
|
Leader
in Quality Gas-Fired Infra-Red Products
Solaronics, Inc. • P.O. Box 80217 • 704 Woodward Ave.
• Rochester, MI 48308-0217
Phone: (800) 223-5335 • Phone: (248) 651-5333 • Fax:
(248) 651-0357
|
