Direct the heat where you want it. Each 5' or 10' reflector rotates independently from 0° to 45°.

• Aircraft Hangers
• Assembly Rooms
• Auditoriums
• Auto Dealerships
• Body Shops
• Auto Service
• Car Dealers
• Car Washes
• Factories
• Farm Buildings
• Fire Stations
• Garages
  
• Green Houses
• Gymnasiums
• Hangars
• Indoor Tennis Courts
• Loading Docks
• Maintenance Facilities
• Manufacturing Plants
• Parking Ramps
• Saves Up To 75% In Energy Costs
• Skating Rinks
• Sports Facilities
• Truck Terminals
• Showrooms
• Warehouses

• A.G.A. And C.G.A. Design Certified.
• Minimum inlet pressure: Nat. gas for 40 to 125 MBTUH - 6" WC Nat. Gas for 130 to 200 MBTUH - 7" WC LP gas - 11" WC
• Maximum inlet pressure: 14" WC.
• 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 130, 135, 140, 145, 150, 155, 160, 165, 170, 175, 180, 185, 190, 195 or 200 MBTUH input.
• 10', 15', 20', 25', 30', 35', 40', 45', 50', 55', 60', 65' or 70' radiant tube lengths.
• Straight, L, Z, U or compact U configurations.
• Vented or unvented exhaust.
• Indoor or outdoor combustion air.
• 35' maximum length of vented exhaust for 40 to 125 MBTUH or 40' for 130 to 200 MBTUH.
• 35' maximum length of outside combustion air for 40 to 125 MBTUH or 40' for 130 to 200 MBTUH.
• Dry-no condensation of flue products during steady-state operations.
• Direct spark ignition - 100% safety shut-off.
• Positive pressure blower with pre-purge cycle.
• Simple chain hanging arrangement.
• Pre-assembled in 5' or 10' sections.

• 120 VAC - 1 - Phase - 60 Hz.
• 1.47 full load amps for 40 to 125 MBTUH.
• 1.33 full load amps for 130 to 200 MBTUH.
• 1/25 HP blower motor - 148 CFM free air for 40 to 125 MBTUH or 138 CFM free air for 130 to 200 MBTUH.
• 1/2" FPT gas inlet.
• Electronic flame monitoring for safety.
• 3-prong 36" electric power cord - 16/3 SJT.
• Air pressure switch for air flow safety.
• Three system validation lights for safety.
• Spark and flame observation window.
• Fixed combustion air orifice.
• 4" O.D. combustion air inlet collar - standard.

• 24 ga. (0.024") Mirror Brite Finish Aluminum.
• 1.98 sq. ft. reflective area per linear foot.
• Rotatable 0 degrees to 30 degrees for 75 to 125 MBTUH or 0 degrees to 45 degrees for 40 to 60 and 130 to 200 MBTUH (patent #4319125).
• Scientifically designed for optimum dispersion.
• Snap-in or snap-out without tools for easy removal.
• 15 3/4" wide x 6 1/2" high x 5' or 10' long.
• Reflectional efficiency 91.7%.

• 4" O.D. tubing x 10' long.
• 14 Ga. (0.083") Aluma Therm (Aluminized Titanium Steel) for 65-100 MBTUH.
• 14 Ga. (0.083") Aluma Therm (Aluminized Titanium Steel) Painted black with high emissivity paint for 105-200 MBTUH.
• 12 Ga. (0.109") black steel for 40 to 60 MBTUH.
• 4.53 lbs. Per linear foot.
• 1.052 sq. Ft. of radiant surface per linear foot.

• 4" O.D. Tubing x 5' or 10' long.
• 12 Ga. (0.109") black steel.
• 4.53 lbs. Per linear foot.
• 1.052 sq. Ft. Of radiant surface per linear foot.
• Wave formed turbulator for increased efficiency.

• 4" I.D. x 8" long.
• Compression coupling design.
• 2 layers of 18 Ga. (0.052") aluminized steel.
• Inner sleeve with precision-meshing teeth for uniform draw and pressure.
• (4) 5/8" zinc plated carriage bolts.
• Turnbuckle #5 malleable iron - 5/8"eye to eye with locking nuts. Pull tested to 720 lbs.
• Sliding hanger for expansion & contraction.

• Limited warranty covering the burner controls, components, and hardware for a period of two (2) years, and the combustion chamber, heat exchangers, and burner core for a period of ten (10) years.