solaronics gas heater








Products
menu
menu
menu
menu


K-SERIES GAS INFRA-RED HEATERS
APPLICATIONS
  • Aircraft Hangers
  • Car washes
  • Gymnasiums
  • Parking Ramps
  • Assembly Rooms
  • Factories
  • Hangars
  • Skating Rinks
  • Auditoriums
  • Farm Buildings
  • Indoor Tennis Courts
  • Showrooms
  • Auto Service
  • Fire Stations
  • Loading Docks
  • Truck Terminals
  • Body Shops
  • Garages
  • Maintenance Facilities
  • Warehouses
  • Car Dealers
  • Green Houses
  • Manufacturing Plants

HEATER

  • A.G.A. and C.G.A. Design Certified.
  • Accepted by I.R.I. and FM.
  • Natural or LP gas.
  • Minimum inlet pressure: Natural gas - 7" WC / LP gas - 11" WC
  • Maximum inlet pressure: Natural or LP gas - 14" WC
  • Manifold pressure: Natural gas - 6" WC / LP gas - 10" WC
  • Flexible inputs from 30,000 to 200,000 BTUH.
  • Horizontal to 30 degree angle mounting.
  • Compact and durable, modular design.
  • All heaters shippable via UPS.
  • Less maintenance - no moving parts.
  • "Instant ON" - "Instant OFF."
  • Requires no direct venting.
  • Simple chain mounting.
  • Factory prewired, prepiped and tested.
CERAMIC COMBUSTION SURFACE
  • Cordierite-based, grooved ceramic tile.
  • Permeable design with alternating rows of precision perforations terminating in slots.
  • Minimum 0.045" diameter perforations.
  • Minimum 190 perforations per sq. inch.
  • Up to 1850 degrees F surface temperature.
  • Capable of reaching full intensity temperature in less than 30 seconds.
  • Stable flame - shorter and closer to ceramic.
 PLENUM CHAMBER
  • 20 Ga. (.035) corrosion-free aluminized steel.
  • One-piece fabrication.
  • Seamless no-weld construction.
  • Single screw removal for quick service.
  • Stainless steel tile retainer clips.
VENTURI MIXER
  • Smooth, seamless spun metal construction.
  • Precision metering of proper air/gas mixture.
  • Matched with ceramic port area.
  • Inspirates 110-120% primary air.
MAIN FRAME
  • 16 Ga. (0.65) corrosion-free aluminized steel.
  • Stainless steel baffle.
  • No weld construction.
  • Double turned upper edge for rigidity.
REFLECTOR
  • 0.032" highly polished aluminum.
  • Double turned lower edge for rigidity.
 CONTROLS
  • 10 control options.
  • 100% safety shut-off available.
  • 25V; 120V; millivolt
  • Direct spark
  • Field adjustable pilot gas regulator.
  • Concealed pilot is protected from drafts.
  • 1/2" FPT gas inlet.

MODELS & BTUH RATINGS

Model Number

BTUH 000'S
Nat -- LP
K-30
30 -- n/a
K-35
35 -- n/a
K-40
40 -- n/a
K-45
45 -- n/a
K-50
50 -- 50
K-55
55 -- n/a
K-60
60 -- n/a
K-70
70 -- 70

Model Number

BTUH 000'S
Nat -- LP
K-75
75 -- 75
K-80
80 -- 80
K-85
85 -- 85
K-90
90 -- 90
K-95
95 -- n/a
K-100
100 -- n/a
K-110
110 -- n/a
K-120
120 -- 120

Model Number

BTUH 000'S
Nat -- LP
K-125
125 -- n/a
K-130
130 -- n/a
K-135
135 -- n/a
K-150
150 -- n/a
K-160
160 -- 160
K-175
175 -- n/a
K-200
200 -- n/a
ACCESSORIES - Protective screens, secondary re-radiating wire grid, parabolic reflector extensions, heat shield available K-30 thru K-100 for decreased clearances to combustibles.

FOOTNOTES FOR TABLES:
1. Models K-70 through K-100 mounted 5 to 30 degrees only.
2. All control options may be actuated by either a thermostat or ON/OFF switch with the exception of control suffix letters RC-N and RC-L which are pull chain operated.
3. NOTE: Controls extend beyond reflector. For models # K-30-60 add 5.00" to the overall length. For all other models add 5.00" to overall width.



K-SERIES GAS INFRA-RED HEATERS • K-SERIES GAS INFRA-RED HEATER SPECS

top of this page

Leader in Quality Gas-Fired Infra-Red Products
Solaronics, Inc. • P.O. Box 80217 • 704 Woodward Ave. • Rochester, MI 48308-0217
Phone: (800) 223-5335 • Phone: (248) 651-5333 • Fax: (248) 651-0357