|
|
|
Solaronics
Hi Intensity Heaters • Hi Intenity Reflectors
|
 REFLECTORS
Infra-red heat that is produced by the burner must be directed into
the space to be heated. High intensity units are AGA and CGA design
certified to be mounted horizontally or at an angle up to 30°
These attitudes plus a standard, shallow, straight sided reflector
insures that infra-red output is not directed to the walls. The
standard reflector reduces dispersion to the sides and produces
a conical spread of approximately 90°. A parabolic reflector
extension may be added to the standard reflector to produce a deep
(concentrating) reflector. The extension is used for concentrating
infra-red energy usually for spot heating or higher mounting height
applications.
 SOLARONICS
K-SERIES
Solaronics gas fired infra-red K-Series heaters are designed to
save fuel in manufacturing facilities, warehouses, airports, hangars
and other buildings. They are especially suited in spaces with high
negative or positive pressures. A wide range of BTUH inputs enables
the specifier to select the best heater for a particular application,
whether a modern, low-ceilinged, well-insulated building or an older,
poorly insulated one with high bays.
Solaronics gas fired infra-red K-Series heaters are available in
many different input capacities. American Gas Association and Canadian
Gas Association certified heater capacities range from 30,000 to
200,000 BTUH and are certified for operation on Natural or Propane
gas. Sixteen different control arrangements feature 100% safety
shut-off; 120V, 25V or Millivolt operation; direct spark; spark
to pilot; glow coil or manual burner ignition; concealed pilot that
is protected from drafts; and 1/2" EPT gas inlet. |
|
