Skip to Store Area:

Solaronics, Inc.

You're currently on:

 

Overhead Door

DoorJet DJTE

Gas Fired Stainless Steel Heaters with Controls Totally Enclosed

DOORJET heaters are designed to be operated only when the door is opened. It is NOT designed as a make-up air heater.

Applications

  • Car Washes
  • Warehouses
  • Manufacturers
  • Auto Body Shops
  • Distribution Centers
  • Maintenance Facilities
  • Marine Repair Facilities

System Information

Minimum Inlet Pressure
Natural and LP/Propane Gas:
- 550,000-750,000 BTUH - 7 inches WC
- 850,000-950,000 BTUH - 8 inches WC

Maximum Inlet Pressure
Natural Gas and LP/Propane Gas: 14 inches WC

1 inch NPT Gas Inlet

Minimum Mounting Height
A DOORJET should be mounted 6 inches above the height of the door. 
Minimum Mounting Height is 12 feet – 6 inches. Mounting below the minimum height would require careful consideration of human safety/comfort and property damage factors and would be the responsibility of the owner and installer. 

Maximum Mounting Height
Maximum Mounting Height is 14 feet – 6 inches.
Installation above the maximum height reduces the
heater’s effectiveness.

Warranty
2 year limited warranty

Controls
Remote control with:
- on-off switch
- summer-winter switch
- control circuit fuse
- remote temperature selector
1 1/2 or 2 HP TEFC ball bearing 3-phase motor
Magnetic motor starter
Air flow switch
Control transformer
High temperature limit switch
Electronic ultraviolet sensor
Gas pressure regulator up to 1/2 PSI
Modulating gas valve/temperature control
"Hot" spark ignition

Product Line Features
Standard Heater Items
  • Watertight enclosure: All gas and electrical controls prewired and sealed
  • Fully assembled and factory tested to ensure safe and dependable long life operation
  • 16 Gauge 304 Stainless Steel casing with two reinforcing angle rings
  • Stainless steel burner baffle
  • Heavy duty axial flow fan
  • Vertical or angle mounting
  • Economical Natural Gas operation: Also LP/Propane and other gaseous fuels options
    550,000 to 950,000 BTUH input ratings to fit most buildings
  • Instant heat: No warm-up period required
  • Special "Jet" type burner
  • Corrosion resistant manifold
  • Hanging holes
Standard Items Shipped Loose With Heater
  • Remote control box
  • Temperature sensor
Recommended Accessories
  • Door limit switch and roller arm
  • Inlet air guard
  • High pressure gas regulator required for pressure over 1/2 PSI (14 inches WC)
  • Universal Heater Mounting Kit
Options
  • Single phase motor
  • Left-hand units with control cabinet on the opposite side
  • FM, IRI or other regulatory approval
Product Documentation
Our website is currently being updated. If you have any questions or issues, please contact us. We anticipate the update to be complete shortly.